product
General Dock acquired ISO 9001 Certification
CE Mark acquired (first in the industry)
RAMP
- >
- RAMP
- >
- MOBILE RAMP
Mobile Ramp
One-Body Type Mobile Ramp
While task type is identical to MOBILE DOCK, the rear end of the Ramp is placed at container's entrance to directly transfer load weights to the container. This is appropriate for loading and unloading lighter loads. This type employs hydraulic type height adjuster, and is the automatic adjusting type through battery attcahment. Hydraulic cylinder is automatic and toolbox can be attached, and needed tools are provided.
Appearance drawings
SPEC
CRITERIA / MODEL | UNIT | 82-TAR | 83-TAR | 84-TAR | 92-TAR | 93-TAR | |||
---|---|---|---|---|---|---|---|---|---|
Width(W) | m | 2.3 | 2.3 | 2.3 | 2.3 | 2.3 | |||
Length(L) | m | 10.7 | 11.7 | 12.7 | 11.7 | 12.7 | |||
Climb(L1) | m | 8.3 | 8.3 | 8.3 | 9.3 | 9.3 | |||
Flat(L2) | m | 2.4 | 3.4 | 4.4 | 2.4 | 3.4 | |||
Climb Angle | degree | 7.3~11.0 | 7.3~11.0 | 7.3~11.0 | 6.4~9.8 | 6.4~9.8 | |||
Net Weight | kg | 3000 | 3300 | 3300 | 3300 | 3600 | |||
Capacity | kg | 13000~15000 | |||||||
Adjusting Height(H) | mm | 1100~1800 | |||||||
Height Operating System | Hydraulic cylinder is automatic System | ||||||||
Tire Shape | ¢420 x 150w Solid Tire | ||||||||
Body Material | SS400 | ||||||||
Slope Road Material | Special Non-slip Metallas | ||||||||
Flat Plate Material | Processing Punching Non-Slip Galvanized Grating + CH.PL | ||||||||
Stepping Material | Galvanized CH.PL | ||||||||
Paint | Epoxy / Urethane Painting (other colors) |
- MODEL Select : Select considering work environment (Capacity and load capacity of forklift, work site, product feature, safety, convenience)
- The above dimensions are standard specifications for typical tasks, and additional specifications can be custom-ordered according to tasks to be performed on-site.
- The above dimensions can be changed without prior notice due to various reasons such as product quality improvement, etc.
1
2
3
4