제너럴도크

product

General Dock acquired ISO 9001 Certification
CE Mark acquired (first in the industry)

MOBILE DOCK

  • 홈
  • >
  • mobile dock
  • >
  • Model select factor

Model select factor

Model Selection Guide

As the product will be used on a long-time basis once it has been selected, please consider various factors related to the work environment (forklift, work space, work load, cargo type, safety and convenience) prior to making a selection.

1. Dock incline length determined based on forklift's lifting capacity

※ Diesel forklift : Used light oil, LPG
※ Electric forklift : battery rechargeable

X Incongruity △ Slightly appropriate ○ Appropriate
Length
Determined / Criteria		 Climb Angle
(Container Height:1600mm standard)		 Loading / Unloading Tasks Unloading tasks Areas with a lot of snow or rain
Diesel Electric Diesel Electric Diesel Electric
7300 mm 10.9° △ X △ X X X
8300 mm 9.3° ○ △ ○ △ △ X
9300 mm 8.2° ○ ○ ○ △ ○ △
10300 mm 7.0° ○ ○ ○ ○ ○ ○

※ The capacity can vary depending on the forklift's capacity, number of years used, and the make.

2. The horizontal part's length is determined based on the load's size and loading method
X Incongruity △ Slightly appropriate ○ Appropriate
Load size and methodology /
horizontal part's length		 2800 mm 3800 mm 4800 mm 5800 mm
Areas with a lot of room between the cargo and the top of the container (1 level loading) ○ ○ ○ ○
Areas with little room between the cargo and the top of the container (2 level loading) X ○ ○ ○
Where cargos are loaded on both sides (2 rows) △ ○ ○ ○
When using extension legs or loading oversized loads X △ ○ ○
Side loading and unloading type X X ○ ○
Upon spinning the top of forklifts (2, 3 directional models) X X ○ ○

※ The capacity can vary depending on the forklift's capacity, number of years used, and the make.

3. Width is determined based on forklift's capacity and loading method

※ Reference : container inside width 2340 mm

① Width is determined by incline based on forklift's capacity
ㆍ3.5Ton under forklift : inclined ramp width 1900 mm over appropriate
ㆍ4.5Ton over forklift : inclined ramp width 2400 mm over appropriate
② The top's (horizontal area) width determined by loading method
ㆍCargos are loaded on both sides (2 rows) : 2600 mm over (Forklift side shifter attached 2450 mm over)
ㆍUpon spinning the forklifts (2, 3 directional models) : 4200mm over
4. Capacity determined based on the forklift's capacity and load weight
Forklift capacity forklift weight Load weight (Max) Excess Load CAPACITY
1.5Ton ~ 2.0Ton ≒3900 Kg ≒2000 Kg 50% over 8800 Kg over
2.5Ton ~ 3.5Ton ≒5800 Kg ≒3000 Kg 50% over 13000 Kg over
4.5Ton ≒6600 Kg ≒4000 Kg 50% over 16000 Kg over
5Ton ~ 7Ton ≒9600 Kg ≒5000 Kg 50% over 22000 Kg over

※The weight of the forklift can slightly vary by make / year
※5Ton ~ 7Ton forklifts can carry out only high cubic container tasks
※Excess load was determined considering the product's task fatigue limit.

5. Product type determined based on workspace's size
Product type Workplace size
Assembled type A place with a large space so there's no problem with storage
Separable (folding type) type A place with little space and difficulty in storage.
2,3 directional models where it is difficult to perform linear tasks with the container
6. Select considering height adjusting type by work load and convenience
Height adjusting type System Apply
Manual adjustment (handle swinging) Mechanically method MOBILE DOCK Standard attached
Electric adsust Hydraulic method (battery rechargeable) MOBILE AUTO RAMP attached
Electric and manual combined Mechanically method (battery rechargeable) MOBILE DOCK attached

※Generally manual tasks are appropriate, and electric type is applied where there is a lot of workload or convenience is required

7. Others

In addition to the above mentioned selection methods, consider task's level of safety and convenience as well as task performers's habits and gather enough opinion from the persons in charge on site to select the most appropriate product for the situation on site.