product
General Dock acquired ISO 9001 Certification
CE Mark acquired (first in the industry)
PRODUCT CHARACTERISTICS
- >
- Product characteristics
Product characteristics
Among the loading equipment that functions with forklifts coming on and off containers from the ground (DOCK, RAMP), product names and characteristics are determined based on their structures, shapes, and differences in usage such as functionalities.
| Product | Characteristics |
|---|---|
| 1 directional MOBILE DOCK (Standrad Type) |
A general container loading / unloading methodology with Dock moving enabled, the product is installed linearly with the container. It is a method in which the width of the Dock's horizontal surface is designed to be wider than the container's entrance. height adjusting system can be selected mechanically, and the Dock's body directly transfers the capacity to the ground. |
| 1 directional MOBILE DOCK (for side loading usage) |
While this is identical to the standrad type. the top part of the Dock (horizontal part) was designed to be longer to allow smoother loading / unloading of forklifts, and also forklifts on the ground can lift up the products from the side to funciton together with forklifts above to allow loading on the vehicle. |
| 1 directional MOBILE DOCK (for heavier loads, Lumber Handling) |
While this is identical to the standard type, this model was designed for heavier load tasks so that forklifts that are heavier than 4.5 tons can carry out thier tasks. Materials such as veneers can be loaded and unloaded from the side. |
| 2 directional MOBILE DOCK |
Appropriate for locations where it is difficult to perform linear tasks. Forward moving, backing out, and perpendicular turns are enabled at the Dock's horizontal surface. The products can be lifted up from the side, enabling two forklifts to perform loading / unloading tasks simultaneously. |
| 3 directional MOBILE DOCK |
While this is similar to 2 directional type, this is approate for locations where the container's direction is not consistent. |
| MOBILE DOCK FOR EXPORT |
Designed to allow the product to be loaded within the container. |
| Fixed PLATFROM DOCK |
This model is appropriate for spots with high volume or with excess space. The task is performed by 2or more forklifts working together on the ground and above the platform. Since more than 2 dock leveler can be installed at one platform, this model allows several vehicles to be connected simultaneously to result in safe and rapid loading / unloading of high volume. (Specification is design produced considering on-site conditions). |
| Movable PLATFORM DOCK |
The task type is one forklift working alone or 2 or more forklifts working together on the ground above the platform. Simultaneous tasking over 1 or 2 containers are enabled, and this is appropriate for spots with high volume. Also, transporting through forklift is enabled, maximizing space utilization. (size is limited) |
| Portable PLATFORM DOCK |
In this model, the loading / unloading type is done by the forklift on the ground lifting the product from the side. After that, the model makes roundtrip carries within the vehicle using the forklifts or small transporting vehicles on top of the platforms. This can be used in tight areas or can be sued together with previously inconvenient dock levelers or ramps to carry out the loading / unloading process safely and rapidly. |
| DECK RAMP | This model is a ramp type equipment that connects the top part of ground deck to allow a forklift to move up and down. There is a fixed type that can be sued only at one spot and a movable type that can be transported to other spots. |
| MOBILE AUTO RAMP | While task type is identical to MOBILE DOCK, the rear and of Ramp of placed at container's entrance to directly transfer task weight to the container. This is appropriate for loading and unloading lighter loads. This model employs hydraulic type height adjuster, and is the automatic adjusting type through battery attachment. |
| Movable DOCK BOARD |
Appropriate for areas where the Deck's top part and vehicle's heights do not match. With one movable Dock Board he task can be carried out regardless of the vehicle's location or height. Also, separation, combination, and transportation are conveniently performed through a forklift, and storage is also convenient as it is a foldable type. |
| Fixed DOCK BOARD |
Product compensates the gap between deck and vehicle. |
| Hydraulic Dock Leveler |
it is installed on the deck of warehouse of factory. When connected with the vehicle, material moving equipments load / unload the goods. The specifications shall be decided according to the vehicle type, deck height and the type of material handing equipment. |
| Fixed type LEVELER |
It is a device that removes free play between deck and vehicles. |
| CAR UP PLATE | Product that adjusts the height of the vehicle when floor of the vehicle is lower Than the deck. |
| Fixed Dock for Agricultural | Equipment used for loading and unloading farm machinery. |
| Deck Plate | Equipment used for loading and unloading cargoes using small portable equipment. |